Regia-AO, Regia-Officers, bureaucrat, administrator
4,915
edits
Changes
→8.6 Shield Guidelines
# All shield boards must be constructed from exterior grade plywood of a minimum of 9mm (3/8”) thickness. Other methods of construction (planking, etc.) will be examined on an individual basis. Shield boards of 8mm may be used if the shield is faced with stout hide of at least 2mm in thickness.
# All exposed plywood edges must be disguised. Please pay attention to the cut-out behind the boss of a centre-grip shield.
# All shields must be edged with leather or rawhide. Nails used to attach the edging must be flush with the surface. Stitching edging to shields is highly recommended. The edging must always be in a good overall state of repair. Metal edging must not be used on combat shields. <p> {{Special Mention Box|Officer=Make the MaA happy|Title= More shields with sewn on shield rims|Caption= Although we cannot categorically say that shield rims were not nailed on it is more likely that they were sewn on with stitches about 3-4cm apart. The thread used can be leather thong, string (or linen thread), or sinew.}}</p>
4. All shield board fronts must be covered in cloth, leather or rawhide. This prevents splinters from impacts to the front of shields causing a hazard to other combatants. Shield backs may be similarly covered.
5. All uncovered plywood surfaces must be scored in the direction of the grain so as to give the impression of planking.
